Back to the vehicle overview

Mercedes-Benz 280 SE 3.5 Cabriolet (W 111)

ALL TIME STARS is pleased to offer this this Mercedes-Benz 280 SE 3.5 W 111. The car belongs to our Collectors edition. These classics and young classics are in good condition both technically and in terms of appearance. Their patina lends them a special character.

The vehicle comes with a complete on-board folder with service record and owner’s manual as well as the full tool kit. Before delivery this Mercedes-Benz classic car receives a comprehensive service, a new safety inspection, an exhaust emissions test (HU/AU). With the 12-month warranty from ALL TIME STARS, the car will give the future owner further driving pleasure.

Visit us and let yourself be convinced by this vehicle.

No liability for printing and writing errors.
Subject to error and prior sale.

599.890 Euro
W 111
Year of construction
Odometer reading
1.900 Kilometer

Vehicle details

280 SE 3.5 Cabriolet
280 SE 3.5
W 111
1.900 Kilometer
Mercedes-Benz Museum
Concours Edition
on request
on request
on request
599.890 Euro
plus value added tax according to 25 § a USTG

Technical details

200 PS
3.499 ccm
disc brakes
disc brakes
9.4 s
205 km/h
13,5 l

Individual configuration

Papyrus white (DB 717)
Leather black (DB 241)
11.1969 - 07.1971


40/1 = Single seats
46/1 = Instrument in english
49/1 = US-Export version
50/3 = Rear view mirror left
51/3 = Radio Becker Europa Stereo
53/1 = Automatic antenna
57/0 = Folding armrest front
58/6 = Behr air conditioner
59/5 = Heat-insulating glass
60/1 = Special grease for rear axle
63/5 = First aid bag/ warning triangle
64/1 = White-wall tires
66/3 = Fuel tank with increased capacity (50 litres)
256 = Rear axle with limited-slip differential
740 = Folding top fabric black (db 9001)

Vehicle history

Vehicle history: Mercedes-Benz 280 SE 3.5 Cabriolet (W 111)

In August 1961, a convertible version of the 220 SEb was presented, which was an exact replica of the coupé-variant except for the absent roof and required body stiffening. This elegant and representative model became the successor of the 128 series convertible, which after October 1960 had been produced no longer. From a technical and stylistic point of view, the new model was derived from the 220 SEb saloon, which was presented in August 1959, and was also assigned to model series 111. In contrast to their predecessors, the coupé and convertible variants were planned as a fully-fledged four-seated models.

They were based on the chassis of the saloon the wheelbase of which remained unchanged accordingly. Although the tailfins, which had made such a sensation at the presentation of the 220 b – 220 SEb models, were now apparent in rudimentary form only, convertible and saloon still had many stylistic features in common. This makes the fact that not a single construction element of the four-door model could be used for the convertible even more surprising. Half a year later, the 300 SE Coupé and 300 SE Convertible, which had been constructed from pre-existing building blocks, had their debut at the Geneva Motor Show. The bodies of the corresponding 220 SEb versions had been touched up with additional decorative elements and were combined with the technology of the Type 300 SE. Thus, these new exclusive models, which were, like the underlying saloon model assigned to model series 112, featured a whole set of technical details. Basic equipment consisted of a 3.0-liter light-alloy engine, 4-speed automatic transmission, powerbrake unit, air suspension and dual circuit brakes with disk brakes at the front and rear wheels. There was additional chrome decoration in the shape of a chrome trim extending from headlights to taillights along the longitudinal bead as well as conspicuous decorative trims at the front and rear wheel arches. From March 1963, the 300 SE coupé and convertible were, like the saloon, available with optional 4-speed manual gearbox; in this case the list price was reduced by DM 1,400. In January 1964 engine power was increased to 170 hp so that driving performance was improved.

This was made possible by converting the injection pump into a six-plunger unit. When the “fintail”-saloons of models 220 Sb, 220 SEb and 300 SE were replaced by a completely reconstructed generation of models, the coupé and convertible versions remained in the sales programme. As these exclusive models, which had been produced for some years then, were by no means outdated beside the saloons of the new generation, expensive stylistic revision or the development of new small-scale serial production of model versions were unnecessary. The two 2.2-liter models received the 150 hp 2.5-liter engine of the 250 SE and also its model designation. Furthermore, like the 3.0-liter models, they were fitted with the 14-inch wheels and bigger disk brakes of 108 series saloons. New, too, was the hydropneumatic compensating spring at the rear axle, which had been incorporated into the 2.5-liter models instead of the coil spring that had hitherto been used, guaranteeing that the level of the body remained constant irrespective of loads. January 1968 witnessed the debut of the 280 SE model, which had a newly developed 2.8-liter engine with 160 hp and became the successor of the 250 SE. This change of generation did not only affect the saloon, but also the two-door versions. Apart from the new engine, only some details had been changed in the coupé and the convertible; like the saloon, both received flatter one-piece decorative wheel covers with integrated boss cap. At the same time as the 2.5-liter models, production of the Type 300 SE coupé and convertible was stopped. There was no immidiate successor, but this was not really necessary either, as engine power was only 10 hp lower than in the 2.8-liter versions and the same driving performance was achieved because of their lower weight.

In September 1969 the more powerful 280 SE 3.5 coupé and convertible models were presented. The completely new 3.5-liter V8-engine with 200 hp was very quiet and smooth and made sports car performance possible. These new models, and also the 280 versions with the 2.8-liter 6-cylinder engine had minor external modifications. The radiator grill was lower and wider and the bonnet was accordingly lower at the front. The bumpers were also modified, now being fitted with rubber strips like on the saloons. There were no external differences between the 8-cylinder versions and the new 6-cylinder versions. In May 1971 the production of the 2.8-liter coupés and convertibles ended and two months later the production of the 8-cylinder versions also ceased, thus bringing the ten-year era of the 111 and 112 series coupés and convertibles to an end. A total of 2,918 coupés and 7,013 convertibles of this range were built in Sindelfingen. The most exclusive version was the 300 SE convertible with 708 units produced, followed by the 250 SE convertible (954 units), the 280 SE 3.5 convertible (1,232 units) and the 280 SE convertible (1,390 units). The 220 SEb coupé achieved the highest production volume with 14,173 units. No replacement was planned for the convertibles; fresh air Mercedes drivers had to be content with the two-seater SL.

Other available vehicles of the series W 111

Your Message

Boxes marked * are mandatory.

Patrik Gottwick

Head of Classic Car Trade ALL TIME STARS Purchase/Sales

Head of Classic Car Trade ALL TIME STARS

Tel. +49 176 309 030 62